HOW TO RECOVER CURRUPTED WINDOW'S XP

This  teaches you to recovery our window xp  when it says *.* file is  missing or corrupt on booting.

 

• You should have a Bootable window's xp CD with its key.

• Start your computer and look for the file that is missing or corrupt. (say NTOSKRNL.EXE)

• Eject the tray of your CD/DVD ROM, put CD into it and thenrestart the computer.

• Now press any key to boot from cd and follow the instructions.

• Press R for recovery console, when the below screen appears.

 

view more..

HOW TO CONNECTION INTERNAL HEADERS IN DESKTOP BOARDS

this tutorial shows the pin discription for all mother board identical to D865GBF/D865GLC.

Figure shows the location of internal headers.(click to enlarge)

1]Connecting Front Panel Audio headers or pins

Figure 1 [A] shows the location of the front panel audio header. Table shows the pin assignments for the front panel audio header.

Front Panel Audio Header Signal Names (J9A2) 

Pin	Signal Name	Pin	Signal Name
1	AUD-MIC	2	AUD-GND
3	AUD-MIC-BIAS	4	AUD-VCC
5	AUD-FPOUT	6	AUD-RET-R
7	HP-ON	8	KEY
9	AUD-FPOUT	10	AUD-RET-L

 
 

view more..

HOW TO REMOVE BOOTING PASSWORD

---

CAUTION

Always turn off the power and unplug the power cord from the computer before changing the jumper. Moving the jumper with the power on may result in unreliable computer operation. The location of the desktop board’s BIOS configuration jumper is shown in Figure.

This procedure assumes that the board is installed in the computer and the configuration jumper block is set to normal mode.

view more..

HOW TO ASSEMBLE A PC

---

1.Installing the Desktop Board

WARNING

Only qualified technical personnel should do this procedure. Disconnect the computer from its

power source before performing the procedures described here. Failure to disconnect the power

before you open the computer can result in personal injury or equipment damage.

Figure shows the location of the 11 mounting holes for Desktop Board D865GBF(as we are 

using Desktop Board D865GBF). Desktop Board D865GLC has eight mounting holes.

view more..

PRECAUTIONS IN INSTALLING AND REPLACING DESKTOP BOARDS

WARNINGS

The procedures in this chapter assume familiarity with the general terminology associated with personal computers and with the safety practices and regulatory compliance required for using and modifying electronic equipment.

Disconnect the computer from its power source and from any telecommunications links, networks, or modems before performing any of the procedures described in this chapter. Failure to disconnect power, telecommunications links, networks, or modems before you open the computer or perform any procedures can result in personal injury or equipment damage. Some circuitry on the board can continue to operate even though the front panel power button is off.

view more..